Review: CTC 3D Printer

I ordered a CTC Bezier 3D printer from eBay on the 9th. It arrived last night. The CTC is a MakerBot Replicator 2 clone.

CTC 3D Printer

CTC 3D Printer

Once I got home, I took it out of the box. The printer is pretty solid, made of wood. I came with 3D printed feet for it, a 3D printed rod to hold the spool of filament, a 2 gig SD card, that contains the instructions and software (more on this later) and a bag of spare screws, nuts, washers and Allen keys, as well as a half spool of filament. The filament I got was black PLA.

So I took it out of the box, and had to attach the extruder and rod for the filament. I also attached the feet. One of which was broken. I was expecting to get feeding tubes for the filament as the pictures on eBay and YouTube reviews showed these, but they weren’t included.

Next thing I noticed, a majority of the screws on the printer were loose. So I tightened them, only to notice that a few were missing. I looked in the box and found a dozen screws and nuts just at the bottom. After attaching these, I decided it was time to  plug the printer in. I heard a chime melody playing and then the LCD display came on. Going through the menu options I found the leveling mode. This moved the extruder to various spots on the bed and would prompt me to try and slide a business card between the bed and the extruder. The card didn’t fit, so I had to adjust a few butterfly nuts under the bed. I repeated this with each spot the extruder would move to. I highly suggest repeating the process a few times as I ended up having some leveling problems on my second print attempt.

Now with everything set up, I was ready to print something. The SD card that comes with the printer contained software for the printer, for both Windows and Mac. However the software was in Chinese. It also included instructions in a .doc file… but they were badly translated from Chinese as well. The card also contained several 3D models to test print. As excited as I was, I decided to skip these and launched the MakerBot Desktop software I had already installed. I loaded up a BB-8 file, changed the properties to those suggested in the BB-8 builders club documents and saved the file to the SD card.

I walked the SD card over to the printer, tried to place the filament spool, but the hole in the spool is a bit smaller than the rod. So for now, until I print a new one, it was just sitting there.

I put the SD card in and selected Print from SD card. This gave me a menu of all the files on the card that I could print. I selected the BB-8 Holoprojector. At this point the printer started making some noise and discharging an ozone smell. After a few seconds, the print bed moved up and the extruder started printing. After 26 minutes, that felt like 3 because of my awe and intrigue in this Star Trek Replicator type device, I had a fully printed Holoprojector! I reach in and tried to pull it off… it wasn’t budging… I grabbed a bondo style spatula that I had on hand and tried to scrape it off… it still wasn’t budging. I reached for my OLFA knife…. and started prying at it… SUCCESS! It came off… but so did the blue painters’ tape that was on the bed. Later on, I found out that PLA, the filament type I used, doesn’t like heated beds. You should set the bed to 50 degrees. Mine was set way hotter than this.


Printed HP

After examining the printed piece I decided I needed to print more! I didn’t want to print something that would take hours… so I loaded the file for the antenna… it was multiple pieces so I laid one in the back and one on the front of the bed. I start the print… after the first layer, I noticed that the print in the back wasn’t extruding onto the bed properly… This is why I suggest running through the leveling a few times.

All in all, I can’t say I’m disappointed at all! Especially when you consider the price I paid for this printer. It’s got a nice sized bed 225x 145 ×150 mm. A double extruder, so I can print things in 2 colors. USB and SD printing options. A heated bed and it’s enclosed.

Once I’m at the point to get a second printer, I’d highly consider getting a second one of these.


Now, as for the missing and broken parts, I emailed the seller and he’s offered to replace the broken foot, mentioned that the screws are loose intentionally for safer travel, but mentioned nothing about the feeder tubes.

Leave a Reply